BIM · All levels
Dynamo Reinforcement Workshop
A hands-on workshop for reinforcing structural elements inside Revit using Dynamo: footings, columns, beams, slabs and lap splices.
This page is translated from Arabic. The course videos are in Arabic.
About this course
Level two of the Dynamo courses: a practical workshop dedicated to reinforcement inside Revit. You will work step by step on reinforcing footings, columns, beams and slabs using Dynamo scripts.
- Instructor
- Eng. Amr Ali
- Software
- Revit, Dynamo
What you will learn
- Bottom reinforcement for isolated footings and top reinforcement for combined footings
- Reinforcing column necks and displaying rebar as Solid and Unobscured
- Reinforcing rectangular and circular columns
- Automatic column and Grids dimensions
- Beam and tie beam stirrups at uniform spacing or variable spacing at the start and end
- Reinforcing simple beams
- Reinforcing Drop Panels and slab meshes
- Lap Splices at maximum length and at variable lengths
Who this course is for
- Civil and structural engineers (this level is for civil engineers only)
What you need before you start
- Completion of level one, the Dynamo From Zero to Hero course
Instructor
Eng. Amr Ali
Course content
01 Dyn02 Reinforcement Workshop With Dynamo Revit 1 lesson6m ⌄
- 01 Introduction to Dynamo RFT Course 06:14
02 WEEK 01 - Foundations 12 lessons4h 21m ⌄
01 Isolated Footings Bott. RFT 5 lessons1h 38m ⌄
- 01 Isolated Footings RFT Part 01 19:03
- 02 Isolated Footings RFT Part 02 14:42
- 03 Isolated Footings RFT Part 03 26:53
- 04 Isolated Footings RFT Part 04 27:34
- 05 Isolated Footings RFT Part 05 09:56
02 Combined Footings Top RFT 1 lesson22m ⌄
- 01 Combined Footings RFT 22:01
03 Set Rebars as Solid and Unobscured 1 lesson11m ⌄
- 01 Set Rebars Solid and Unobscured 11:18
04 Columns Neck RFT 5 lessons2h 10m ⌄
- 01 Columns Neck Part 01 26:00
- 02 Columns Neck Part 02 36:40
- 03 Columns Neck Part 03 12:15
- 04 Columns Neck Part 04 30:29
- 05 Columns Neck Part 05 24:10
03 WEEK 02 - Columns 11 lessons3h 52m ⌄
01 Rectangular Columns RFT 5 lessons1h 21m ⌄
- 01 Columns RFT Part 01 10:46
- 02 Columns RFT Part 02 34:42
- 03 Columns RFT Part 03 12:10
- 04 Columns RFT Part 04 11:26
- 05 Columns RFT Part 05 12:19
02 Round Columns RFT 2 lessons36m ⌄
- 01 Round Columns RFT Part 01 20:12
- 02 Round Columns RFT Part 02 16:11
03 Columns and Grids Dimensions 2 lessons1h 21m ⌄
- 01 Columns and Axes Dimensions Part 01 44:28
- 02 Columns and Axes Dimensions Part 02 36:22
04 Grids Dimensions 2 lessons34m ⌄
- 01 Grids Dimensions Part 01 20:31
- 02 Grids Dimensions Part 02 13:17
04 WEEK 03 - Beams 9 lessons2h 24m ⌄
01 Beams RFT 9 lessons2h 24m ⌄
- 01 Beams Stirrups - Uniform Spacing Part 01 25:49
- 02 Beams Stirrups - Uniform Spacing Part 02 25:20
- 03 Ground Beams Stirrups - Uniform Spacing 07:22
- 04 Beams Stirrups - Fixed Start End Spacing 13:18
- 05 Beams Stirrups - Var. Start End Spacing 04:50
- 06 Simple Beams RFT Part 01 12:29
- 07 Simple Beams RFT Part 02 26:54
- 08 Simple Beams RFT Part 03 14:15
- 09 Simple Beams RFT Part 04 13:58
05 WEEK 04 - Slabs 6 lessons2h 2m ⌄
01 Drop Panels RFT 3 lessons52m ⌄
- 01 Drop Panel RFT Part 01 18:48
- 02 Drop Panel RFT Part 02 20:37
- 03 Drop Panel RFT Part 03 12:06
02 Slab Mesh RFT 1 lesson15m ⌄
- 01 Slab Mesh RFT 14:43
03 Rebars Lap Splice max Length 1 lesson24m ⌄
- 01 Rebars Lap Splice max Length 24:25
04 Rebars Lap Splice Var. Length 1 lesson31m ⌄
- 01 Rebars Lap Splice Var. Length 30:59
Lengths are measured from the video files themselves.
What do you get when you enroll?
Recorded videos
Watch whenever suits you and replay any lesson as often as you like.
B&E Player
The course runs in a protected player on your computer, even offline after activation. If you change computers, you get 3 free moves per course; after that a move costs a small fee.
Certificate of completion
You request the certificate after you solve the course tasks, finish part of the course and upload your work to the site. It has a verification page with its number.
Support and follow-up
Ask in the forum or book a support call with the instructor.
Dynamo Reinforcement Workshop
Start today and learn on real projects
14 chapters, 39 lessons, 12.8 hours of teaching
What our students say
صباح الخير ياهندسة ازي حضرتك يارب تكون بخير، حابب اشكر حضرتك الاول علي المجهود الجبار المعمول ف الدبلومة 💙🙏 كنت ف انترفيو الاسبوع اللي فات في مكتب كبير، والمهندس اللي عمل الانترفيو انبهر جدا بمستوايا ف الريفيت وسالني اتعلمت مع مين، فقلتله ان معظم اللي اعرفه كان من مهندس حسام الزهيري والدبلومة بتاعته وطلع عارف حضرتك 😂 والحمدلله اتقبلت وفي مرحلة التفاوض علي المرتب 💙
والله دي حقيقه، انا كنت ف شركه زدت ٦ أضعاف مرتبي بعد توفيق ربنا الفضل للمحتوى بتاعكم
عاوز اقولك حاجه، والله انا رحت شركه كبيره، مستوى حلو جدا جدا ف الريفيت مقارنه بال موجودين الفضل لربنا ثم حضرتك، ورشحت لحضرتك زميل هنا واشترك مع حضرتك من اسبوع
Related courses
Planning 7.5 h All levels
Projects Monitoring and Reporting – using Primavera and Power BI
Eng. Mahmoud Abozeid
BIM 74.8 h All levels
Mastering Api Using C# (Revit + WPF + CAD + Civil 3d)
Eng. Alaa Elsolami
BIM 114.4 h All levels
Mastering Autodesk Revit
Eng. Hosam Elzohry & Eng. Ahmed Abdelaal Youssef